Lowlander Mk4 – 105

Carrying capacity: 27,780Ibs | Cubic Feet Heaped: 618 cubic feet

Lowlander 105 TVA with slurry door, stone guard extension, lift off augers and 580/70 R38 wheels

Carrying capacity: 27,780Ibs
Cubic Feet Heaped: 618 cubic feet
Body width 59”
Heavy duty fully welded construction
Handles all manure types and other materials
Dynamically balanced twin vertical augers
3/8” thick auger flights from heat treated BORON steel
Augers protected by rubber cushioned drive
Auger gearbox protection via shearbolt
Reversible BORON cutters with re-inforcing plate
One piece auger gearbox arrangement
Robust, purpose built agricultural axle for application
Long lasting composit floor shaft bearings

Floor protected by cross line relief valve
High torque hydraulic motor
Quick fit socket on full width floor slats
Calibrated 5/8” grade 80 high tensile floor chains
High tensile rear floor shaft
Variable floor speed control
1000 rpm PTO speed or 540 rpm
Single pole drawbar for tighter turning circle
Hydraulic brakes & handbrake
Full road lighting
Choice of standard colour, fully shot blasted with 2 pack paint finish
Screwjack as standard
3 year warranty, details available upon request

Twin dynamically balanced vertical beaters

Twin 695mm diameter dynamically balanced vertical beaters have flights laser cut from heat treated BORON steel to improve strength and service life. Reversible hardened cutters manufactured using BORON steel are bolted and supported along the back edge, shred products leaving a wide and even spread. Three fixed position BORON steel bottom blades per auger give wider spread widths of materials that are either fine or wet

Horse shoe braced cutters

The horse shoe brace retains the cutter reducing the chance of them being knocked off or becoming loose

Built in flared extensions

Built in flared extension sides add considerable carrying capacity to machines, spreader design load capacity should be checked relative to the density of the material to be carried

Double acting Hydraulic guillotine slurry door (End gate)

An extremely strong design and construction ensures that the door can be used as a grading device for light applications of materials as well as a device for retaining very running products

Full width floor slats – MK4

Full width floor slats clear the entire floor area, eliminating the possibility of bridging, a problem sometimes encountered with multi chain and slat floor systems. The “socket fit” design allows for easy maintenance which can be carried out in the field, it also allows the chain to pull straight should a slat become bent

Floor chains – 5/8″

5/8, grade 80, heavy duty chains are drawn by high tensile sprockets, which are fitted to the front shaft as well as the driven rear shaft, ensuring perfect alignment and timing of the chains. Each chain has a 32 tonne breaking strain certificate. The same specification chain is used throughout the Mk4 range

One piece gearbox – Mk4

The robust one piece gearbox houses internal gear sets unique to Bunnings in order to ensure that auger speeds are optimised to achieve excellent spread patterns. They are large in diameter with 2 1/8” output shafts manufactured from heat treated steel. The precision machined castings ensure perfect alignment of all the driveline components

Floor Drive Gearbox – Mk4

A hydraulically driven 500 series floor drive gearbox is fitted to ensure an even feed of material to the spreading mechanism at all times. With a reverse feature, any foreign object too large to pass through the beaters can be easily removed. An adjustable crossline relief valve also delivers additional protection

Rubber cushion drive coupling

Green Auger With Blades And Drive Coupling

Especially developed to reduce shock loads to the auger drive gearbox, the rubber cushion arrangement located between the output shaft of the auger gearbox and the base of the auger contributes to the reliability and longevity of the machine

Lift off augers

To enable the machine to be used for other jobs the auger assembly can be removed for the faster unloading of products such as grass, maize silage and even grain

Drop down covers for deck cleaning

To help clean out the deck area around the bottom of the augers these covers can be opened to allow material and water to flow out

Wide angle PTO assembly

The wide angle joint allows for turning on headlands with the PTO still engaged. It should be noted that the manufacturers recommend that you do not turn with the PTO under load

Floor chain tensioning

A robust, simple and reliable floor tensioning system allows easy adjustment ensuring that chains are kept to their optimum setting. The chains are visible from outside the machine making it easy to judge when tensioning is required. 2″ high tensile shafts are used

Floor shaft bushes – Mk4 – 2″

Floor drive shafts rotate through polyester re-inforced composite bushes that contain a solid graphite filler, chosen for their high load applications in a variety of environments they are greasable, further extending their life

Automatic light covers

Machines fitted with slurry doors have Automatic Light Covers as standard. A simple mechanism triggered by the slurry door, moves the light cover over the lights as the slurry door begins to open

Ground Level Greasing

Easy greasing of top bearings via low level greasing points

Cat 4 swivel ball

Cat 4 swivel ball with adjustable height to suit different tractor hitch heights

In cab electric floor speed control

The in-cab electric remote floor speed control allows the operator to make adjustments to the floor speed while on the move

Simple canopy

Designed for use when spreading low applications of products like Lime and chicken litter, the canopy ensures that all material is spread by the bottom auger blades

Wide angle PTO c/w Cam Clutch

The wide angle joint allows for turning on headlands with the PTO still engaged. Instead of shear bolt protection a cam clutch can be fitted to PTO

Slurry door height indicator

This options allows the operator to monitor door opening positions in relation to application rates

Sludge Cake Kit

This option includes closer position floor slats, angled pressings on the rear of the machine to prevent sticky products building up on flat surfaces and angle throwers on augers

HMW Plastic Floor

HMW plastic floor virtually eliminates the possibility of products sticking to the floor of the spreader. It can also improve the flow of products with high friction values. The material is extremely durable and is in addition to the spreaders standard floor construction

Wheels – 105

Standard wheel is a 580/70 R38 10 stud.

Options: 710/70 R38 10 stud

Detachable Spinner Deck

Detachable spinner deck can be attached to the rear of a vertical auger spreader in just a few minutes. Once fitted, products such as chicken manure, composts and lime can be spread evenly and accurately at low application rates