Tel: Canada 306 731 2954

LOWLANDER FARMSTAR 80 TANDEM

  • Carrying capacity: 17,637 lbs
  • Cubic feet heaped: 265 to 350
  • Carrying capacity: 17,637 lbs
  • Cubic feet heaped: 265
  • Heaped extended capacity: 350
  • Heavy duty fully welded construction
  • Dynamically balanced twin vertical augers
  • Augers protected by rubber cushioned drive
  • Auger gearbox protection via shearbolt
  • Reversible cutters with re-inforcing plate
  • One piece auger gearbox arrangement
  • Long lasting composit floor shaft bearings
  • Floor protected by cross line relief valve
  • High torque hydraulic motor
  • Quick fit socket on full width floor slats
  • Calibrated grade 80 high tensile floor chains
  • Variable floor speed control
  • 1000 rpm PTO speed or 540
  • Single pole drawbar for tighter turning circle
  • Hydraulic brakes & handbrake (Optional)
  • Full road lighting
  • Access ladder

Features


Floor chains

5/8, grade 80, heavy duty chains are drawn by high tensile sprockets, which are fitted to the front shaft as well as the driven rear shaft, ensuring perfect alignment and timing of the chains. Each chain has a 35 ton breaking strain certificate. The same specification chain is used throughout the Mk4 range.

Continue reading →

Automatic light covers

When machines are fitted with a slurry door the LED lights are automatically covered when the door starts to open.

Continue reading →

Rubber cushion drive coupling

Especially developed to reduce shock loads to the auger drive gearbox, the rubber cushion arrangement located between the output shaft of the auger gearbox and the base of the auger contributes to the reliability and longevity of the machine.

Continue reading →

Floor shaft bushes

Bush highlighted in red.  Floor shafts rotate through Polyester re-enforced composite bushes that contain a solid graphite filler. Chosen for their high load applications in a variety of environments, they are greasable, which further extends their life.

Continue reading →

One piece gearbox

The robust one piece SRT 8 gearbox is fitted to both the Lowlander 60 and 80. The precision machined castings house heat treated components which are kept perfectly aligned. Internal gear-sets are unique to Bunning and ensure that auger speeds are optimised to achieve excellent spread patterns.

Continue reading →

Floor chain tensioning

A robust, simple and reliable floor tensioning system allows easy adjustment ensuring that chains are kept to their optimum setting. The chains are visible from outside the machine making it easy to judge when tensioning is required. 2″ high tensile shafts are used.

Continue reading →

Full width floor slats

Full width floor slats clear the entire floor area, eliminating the possibility of bridging, a problem sometimes encountered with multi chain and slat floor systems. The “socket fit” design allows for easy maintenance which can be carried out in the field, it also allows the chain to pull straight should a slat become bent.

Continue reading →

Floor drive gearbox

The 350 series floor drive gearbox is hydraulically driven to ensure an even feed of material to the spreading mechanism at all times. With a reverse feature, any foreign object too large to pass through the beaters can be easily removed. An adjustable cross-line relief valve also delivers additional protection

Continue reading →

Twin dynamically balanced vertical augers

Twin 27″ diameter dynamically balanced vertical augers have flights laser cut from heat treated Boron steel to improve strength and service life. Reversible Hardened Boron points manufactured using BORON steel are bolted and supported along the back edge.

Continue reading →

Specs


Lowlander Farmstar

 Farmstar 60Farmstar 80Farmstar 80 Tandem
AxlesinglesingleTandem Sprung suspension
Axle Beam Size3-1/2"4-3/4"3-1/8"
Carrying Capacity14,546lbs17,637lbs17,637lbs
Cubic Feet Level141212212
Cubic Feet Heaped212265265
Cubic Feet Heaped with flared extensions265350350
Body Size (in inches)140 x
59 x
31
177 x
59 x
31
177 x
59 x
31
Floor DriveHydraulicHydraulicHydraulic
Floor Chain Size5/8"5/8"5/8"
Brake SizeHydraulic Brakes OptionalHydraulic Brake OptionalHydraulic Brake Optional
Tyre Size420x85 R3418.4x34 PR1416.5L x 16.1 SL
Spread MechTwin vertical augersTwin vertical augersTwin vertical augers
Spread WidthUp to 52 ftUp to 52 ftUp to 52 ft
PTO Speed540/1000 RPM540/1000 RPM540/1000 RPM
Floor Plate3/16"3/16"3/16"
Side Plate3/16"3/16"3/16"
Unladen Weight7,055 lbs7,700 lbs8250 lbs

Dimensions


dimensions-farmstar-80

Lowlander Farmstar Dimensions

ModelABCDEFG
Farmstar 60137.8"59"31"70.3"240"99.2"92.1"
Farmstar 80186"59"31"73"277"105"97"
Farmstar 80 Tandem186"
59"31"73"277"102"97"

Options (this model)


RDS GT 400 weigh system

The GT 400 not only displays the live weight in the machine but also allows the operator to add the total weight up by pressing the start/stop button after every load. This simple weigh unit can be fitted through the whole range of Bunning muck spreaders from the 60 to the mammoth 380HD.  The system is integrated with the same load cells as used on the popular and proven RDS Apollo psi indicator.

Continue reading →

Tandem Axle, Rocking Beam For 60

If preferred, a tandem axle rocking beam option is available on these models. Standard rocking beam wheel equipment would be 16.5L x 16.1SL other alternatives are available so please contact us to discuss these options.

Continue reading →

LED Strobe/Flashing Lights

These ultra bright LED flashing/strobe lights are fitted as a pair and give a highly visable warning.

Continue reading →

Non Standard Colours

While Bunning Blue or Bunning Green are our standard colours. From a BS or RAL number we can paint your machine in almost any colour.

Continue reading →

Weigh cells with automatic rate control

The RDS Apollo spreader controller has all the features for today’s farming techniques. Target application rate is entered into the controller which then monitors the load and adjusts the floor speed accordingly. GPS variable rate technology is supplied as standard and the system can receive an application rate from a third party controller such as John Deere Greenstar, Raven or Trimble. Or a predefined application map can be loaded to the SD card and automatically vary the rate (Precision Farming). Data can be logged via the optional printer

icp477

or saved to a SD card, which can then be exported to an Excel spreadsheet along with treatment maps.  Live weighing is via 20 tonne weigh cells situated on both axle and drawbar. This is then clearly viewed on the controller screen together with your speed, target rate and live application rate. There is a choice of either using the machine in ‘Automatic or Manual Control’ depending on your requirements.

Continue reading →

Air brakes

A choice of either 2 Line Air Only Brakes or Dual Supply (2 Line Air and Hydraulic) Brakes.

Continue reading →

Slurry door height indicator

This options allows the operator to monitor door opening positions in relation to application rates

Continue reading →

Drop down covers for deck cleaning

To help clean out the deck area around the bottom of the augers these covers can be opened to allow material and water to flow out

Continue reading →

Simple canopy

Designed for use when spreading low applications of products like Lime and chicken litter, the canopy ensures that all material is spread by the bottom auger blades

Continue reading →

Lift off augers

To enable the machine to be used for other jobs the auger assembly can be removed for the faster unloading of products such as grass, maize silage and even grain

Continue reading →

Printer for PSi Apollo Spreader Controller records

This compact printer is connected to the RDS Apollo Controller and produces a receipt which can be printed off showing Start & Finish Time, Job Number, Farm & field Number, Target Rate, Total Area and Total Weight. This can be kept for your records or supplied to your customer as a receipt for work complete.

Continue reading →

Steel PTO guard

This option is designed to protect the PTO shaft from damage by the tractors lift arms.

Continue reading →

Awaiting Image

Tool box

A robust item designed with a sloping lid to reduce the build up of material

Continue reading →

Wide angle PTO assembly

The wide angle joint allows for turning on headlands with the PTO still engaged. It should be noted that the manufacturers recommend that you do not turn with the PTO under load.

Continue reading →

Double acting Hydraulic guillotine slurry door (End Gate)

An extremely strong design and construction ensures that the door can be used as a grading device for light applications of materials as well as a device for retaining very running products.

Continue reading →

Build weigh cell ready

As an option the machine can be manufactured to take weigh cells at a future date. The dummy weigh cells can be easily removed and replaced with full weigh cells.

Continue reading →

In cab electric floor speed control

The in-cab electric remote floor speed control allows the operator to make adjustments to the floor speed while on the move.

Continue reading →

Options (all models)


Below are the options available throughout the entire product range

RDS GT 400 weigh system

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Optional Equipment | Widebody - 180 | Widebody - 230 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

The GT 400 not only displays the live weight in the machine but also allows the operator to add the total weight up by pressing the start/stop button after every load. This simple weigh unit can be fitted through the whole range of Bunning muck spreaders from the 60 to the mammoth 380HD.  The system is integrated with the same load cells as used on the popular and proven RDS Apollo psi indicator.

Continue reading →

Tandem Axle, Rocking Beam For 60

To fit: Lowlander Farmstar 60 AND 80

If preferred, a tandem axle rocking beam option is available on these models. Standard rocking beam wheel equipment would be 16.5L x 16.1SL other alternatives are available so please contact us to discuss these options.

Continue reading →

Awaiting Image

20″ Built In Flared Extensions

To fit: Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Widebody - 180 | Widebody - 230 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

12″ Built In Flared Extensions

To fit: MK4 90 | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150

Built in flared extension sides add considerable carrying capacity to machines, spreader design load capacity should be checked relative to the density of the material to be carried. This option is not available for machines that are to be containerised for transport, the bolt on option should be specified.

Continue reading →

Lowlander Widebody 230 Manure Spreader

20″ High Bolt On Flared Extension

To fit: Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Widebody - 180 | Widebody - 230 | Widebody 180 Truck Mount | Widebody 230 Truck Mount
Awaiting Image

12″ High Bolt on Flared Extension

To fit: MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

LED Strobe/Flashing Lights

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

These ultra bright LED flashing/strobe lights are fitted as a pair and give a highly visable warning.

Continue reading →

LED front & rear Mudguard marker lights

To fit: MK4 75 | MK4 90 | Lowlander Widebody 180 HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180

These bright LED marker lights are fitted to the front & rear of the mudguards and give a positive marker to the overall width of the machine.

Continue reading →

Non Standard Colours

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

While Bunning Blue or Bunning Green are our standard colours. From a BS or RAL number we can paint your machine in almost any colour.

Continue reading →

High Augers

To fit: MK4 75 | MK4 90

Higher Augers are available as a factory build option for the Lowlander 75 & 90. They increase the height of the augers by 12″.

Continue reading →

Swivel pick-up eye attachment

To fit: MK4 75 | MK4 90 | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350

Weigh cells with automatic rate control

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

The RDS Apollo spreader controller has all the features for today’s farming techniques. Target application rate is entered into the controller which then monitors the load and adjusts the floor speed accordingly. GPS variable rate technology is supplied as standard and the system can receive an application rate from a third party controller such as John Deere Greenstar, Raven or Trimble. Or a predefined application map can be loaded to the SD card and automatically vary the rate (Precision Farming). Data can be logged via the optional printer

icp477

or saved to a SD card, which can then be exported to an Excel spreadsheet along with treatment maps.  Live weighing is via 20 tonne weigh cells situated on both axle and drawbar. This is then clearly viewed on the controller screen together with your speed, target rate and live application rate. There is a choice of either using the machine in ‘Automatic or Manual Control’ depending on your requirements.

Continue reading →

Air brakes

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350

A choice of either 2 Line Air Only Brakes or Dual Supply (2 Line Air and Hydraulic) Brakes.

Continue reading →

Slurry door height indicator

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Optional Equipment | Widebody - 180 | Widebody - 230 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

This options allows the operator to monitor door opening positions in relation to application rates

Continue reading →

Drop down covers for deck cleaning

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 320 | Lowlander Widebody 380 HD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

To help clean out the deck area around the bottom of the augers these covers can be opened to allow material and water to flow out

Continue reading →

Steering axle

To fit: Features Lowlander Widebody 320 | Features Lowlander Widebody 380 HD | Features Widebody 320 HBD | Features Widebody 350 HBD | Features Widebody 380 HD HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD

To reduce the scrub on tyres and damage to grassland when turning. Both the 320 & 380HD models can be ordered with either one (rear as standard) or two (front and rear)  self-steer axles.

Continue reading →

Simple canopy

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 320 | Lowlander Widebody 380 HD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

Designed for use when spreading low applications of products like Lime and chicken litter, the canopy ensures that all material is spread by the bottom auger blades

Continue reading →

Large diameter bottom blades

To fit: MK4 75 | MK4 90 | Widebody 140 Truck Mount | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

This option can help to increase the spread width of some finer products spread at low application rates and are most effective when used in conjunction with a Simple Canopy

Continue reading →

Lift off augers

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 320 | Lowlander Widebody 380 HD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

To enable the machine to be used for other jobs the auger assembly can be removed for the faster unloading of products such as grass, maize silage and even grain

Continue reading →

Printer for PSi Apollo Spreader Controller records

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

This compact printer is connected to the RDS Apollo Controller and produces a receipt which can be printed off showing Start & Finish Time, Job Number, Farm & field Number, Target Rate, Total Area and Total Weight. This can be kept for your records or supplied to your customer as a receipt for work complete.

Continue reading →

Sludge cake build

To fit: Widebody 140 Truck Mount | Lowlander Widebody 320 | Lowlander Widebody 380 HD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

A specialist auger design for machines that are purchased primarily to spread Bio-solids (sludge cake)

Continue reading →

Awaiting Image

Sludge cake Kit

To fit: MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 320 | Lowlander Widebody 380 HD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

This option includes floor slats positioned on alternate flat links on the floor chain and angled pressings on the rear of the machine to prevent sticky product building up on flat surfaces

Continue reading →

Steel PTO guard

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350

This option is designed to protect the PTO shaft from damage by the tractors lift arms.

Continue reading →

Awaiting Image

Tool box

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

A robust item designed with a sloping lid to reduce the build up of material

Continue reading →

Rear clevis drawbar with trailer brakes and light connections

To fit: MK4 75 | MK4 90 | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350

Wide angle PTO assembly

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Optional Equipment | Widebody - 180 | Widebody - 230

The wide angle joint allows for turning on headlands with the PTO still engaged. It should be noted that the manufacturers recommend that you do not turn with the PTO under load.

Continue reading →

Double acting Hydraulic guillotine slurry door (End Gate)

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 | Lowlander Widebody 320 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Optional Equipment | Widebody - 180 | Widebody - 230 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

An extremely strong design and construction ensures that the door can be used as a grading device for light applications of materials as well as a device for retaining very running products.

Continue reading →

Build weigh cell ready

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Features Lowlander Widebody 320 | Features Lowlander Widebody 380 HD | Features Widebody 320 HBD | Features Widebody 380 HD HBD | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

As an option the machine can be manufactured to take weigh cells at a future date. The dummy weigh cells can be easily removed and replaced with full weigh cells.

Continue reading →

In cab electric floor speed control

To fit: Lowlander Farmstar 60 AND 80 | MK4 75 | MK4 90 | Widebody 140 Truck Mount | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350 | Widebody 180 Truck Mount | Widebody 230 Truck Mount

The in-cab electric remote floor speed control allows the operator to make adjustments to the floor speed while on the move.

Continue reading →

80mm (3-1/8″) Scharmuller spoon attachment

To fit: MK4 75 | MK4 90 | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 350 HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230 | Widebody - 350

Sprung drawbar

To fit: MK4 90 | Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 350 HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150 | Widebody - 180 | Widebody - 230

Sprung Heavy Duty drawbar

To fit: Features Lowlander Widebody 380 HD | Features Widebody 320 HBD | Features Widebody 380 HD HBD | Lowlander Widebody 350 HBD | Widebody - 350

The Sprung Heavy Duty Drawbar uses a 21 tonne spring and comes with a bolted clevis hitch

Continue reading →

Hydraulic opening rear canopy

To fit: Lowlander Widebody 180 HBD | Lowlander Widebody 230 HBD | Lowlander Widebody 320 HBD | Lowlander Widebody 350 HBD | Lowlander Widebody 380 HD HBD | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD

As an option the rear canopy can be opened hydraulically to enable the machine to make windrows for composting or for ease of maintenance. Safety props are supplied and should be used prior to carrying out maintenance.

Continue reading →

9.5″ Bolt on extension sides

To fit: Lowlander Farmstar 60 AND 80

Tandem axle, rocking beam

To fit: MK4 75 | MK4 90 | MK4 105 HBD | MK4 120 HBD | MK4 150 HBD | Mk4 105 | Mk4 120 | Mk4 150

Detachable Spinner Deck

To fit: Widebody 140 Truck Mount | Lowlander Widebody 320 | Mk4 105 | Mk4 120 | Mk4 150 | Optional Equipment | Widebody - 180 | Widebody - 230 | Widebody 180 Truck Mount

Detachable spinner deck can be attached to the rear of a vertical auger spreader in just a few minutes. Once fitted, products such as chicken manure, composts and lime can be spread evenly and accurately at low application rates.

Continue reading →

Widebody Augers

To fit: Mk4 105 | Mk4 120 | Mk4 150

Twin 34″ diameter dynamically balanced vertical augers have flights laser cut from heat treated Boron steel to improve strength and service life. 3/4″ thick reversible points manufactured from heat treated Boron steel are bolted and supported along the back edge.

Continue reading →

Copyright 2018 GT Bunning & Sons Ltd | Privacy | Terms | Intellectual Property | Site by Logic Red